ecommun / owncloud_ynh

Blame view

sources/3rdparty/phpdocx/pdf/lib/ttf2ufm/src/FONTS.html 26.4 KB
  <HTML>
  <HEAD>
  <TITLE>
  The ttf2pt1 font installation guide 
  </TITLE>
  </HEAD>
  <BODY>
  Sergey A. Babkin
  <br>
  <A HREF="mailto:babkin@users.sourceforge.net">
  &lt;babkin@bellatlantic.net&gt;</A> or <A HREF="mailto:sab123@hotmail.com">&lt;sab123@hotmail.com&gt;</A>
  <p>
  <! 
  (Do not edit this file, it is generated from FONTS.html!!!)
  >
  
  <!-- =defdoc cv ttf2pt1_convert 1 -->
  <!-- =defdoc gs ttf2pt1_x2gs 1 -->
  <H2>
  THE FONT INSTALLATION GUIDE 
  <br>
  for the TTF to Type1 converter and fonts generated by it
  </H2>
  <!
  ========================================================
  >
  
  There is historically a number of problems with the support of the 8-bit
  character encodings. This installation guide pays a lot of attention
  to the 8-bit issues, because these issues are responsible for the
  most of troubles during the installation of fonts. But they are
  not the only things covered in this guide, so it's worth reading
  even if all you need is plain ASCII. For convenience of reading
  I have marked the paragraphs dealing solely with 8-bit problems
  with characters <FONT COLOR="#3333FF"><FONT SIZE=-1>*8*</FONT></FONT>.
  <p>
  
  To simplify this installation the distribution package of the
  converter contains a number of scripts written in shell and
  Perl. So, to run them you will need a shell interpreter (Bourne-shell,
  POSIX-shell, Korn-shell are OK, ba-shell is probably also OK but not 
  tested yet). The Perl scripts were tested with Perl5 but probably
  should work with Perl4 too. All the scripts are located in the
  `scripts' subdirectory.
  <p>
  
  This guide considers the following issues of installation of the 
  fonts:
  <p>
  
  <b>
  <ul>
  <li> <A HREF="#X11">X11</A><br>
  <li> <A HREF="#gs">Ghostscript</A><br>
  <li> <A HREF="#win">MS Windows</A><br>
  <li> <A HREF="#netscape">Netscape Navigator/Communicator</A><br>
  <li> <A HREF="#rpm">Linux RPM package</A><br>
  <li> <A HREF="#framemaker">FrameMaker</A><br>
  <li> <A HREF="#soffice">StarOffice</A><br>
  </ul>
  </b><p>
  
  <A NAME="X11"></A>
  <H3>
  X11
  </H3>
  <!
  ===
  >
  
  <!-- =section cv NAME -->
  <!-- =text B&lt;ttf2pt1_convert&gt; - convenience font conversion script -->
  <!-- =stop -->
  To simplify the conversion a set of scripts is provided with <b>ttf2pt1</b>.
  They are collected in the `<TT>scripts</TT>' subdirectory. 
  <p>
  
  <!-- =section cv DESCRIPTION -->
  `<b>Convert</b>' is the master conversion script provided with ttf2pt1. 
  When installed into a public directory it's named `<b>ttf2pt1_convert</b>' 
  to avoid name collisions with the other programs.
  <p>
  <!-- =stop -->
  
  It's called as:
  <p>
  
  <!-- =section cv SYNOPSIS -->
  <!-- =text ttf2pt1_convert B&lt;[config-file]&gt; -->
  <!-- =stop -->
  <blockquote>
    convert <i>[config-file]</i>
  </blockquote>
  
  <!-- =section cv DESCRIPTION -->
  If the configuration file is not specified as an argument then the file
  `<TT>convert.cfg</TT>' in the current directory is used. This file contains
  a set of configuration variables. The distribution contains a sample file
  file `<TT>convert.cfg.sample</TT>'. Please copy it to `<TT>convert.cfg</TT>',
  look inside it and change the configuration variables. The more stable
  configuration variables, such as the path names of the scripts and
  encoding files are located in `<TT>convert</TT>' itself, they are
  automatically updated when installing <b>ttf2pt1</b>.
  <p>
  
  Put all the TTF fonts you want to convert into some directory (this
  may be just the directory that already contains all the Windows
  fonts on a mounted FAT filesystem). If you have fonts in different
  source encoding then put the fonts in each of the encodings
  into a separate directory. Up to 10 source directories are
  supported. If you (in a rather unlikely case) have more source
  directories then you can make two separate runs of the converter,
  converting up to 10 directories at a time.
  <p>
  
  The variables in the configuration file are:
  <p>
  
  <!-- ==over 2 -->
  <!-- ==item * -->
  <B><tt>SRCDIRS</tt></B> - the list of directories (with absolute paths) with 
    TTF fonts. Each line contains at least 3 fields: the name of the directory,
    the language of the fonts in it (if you have fonts for different 
    languages you have to put them into the separate directories) and the
    encoding of the fonts. Again, if you have some of the TTF typefaces in 
    one encoding, and some in another (say, CP-1251 and KOI-8), you have 
    to put them into the separate source directories. Some lines may contain
    4 fields. Then the fourth field is the name of the external map to
    convert the Unicode fonts into the desirable encoding. This map is
    used instead of the built-in map for the specified language.
  <p>
  
  <FONT COLOR="#3333FF"><FONT SIZE=-1>*8*</FONT></FONT>
  An interesting thing is that some languages have more than one
  widely used character encodings. For example, the widely used
  encodings for Russian are IBM CP-866 (MS-DOS and Unix), KOI-8
  (Unix and VAX, also the standard Internet encoding), IBM CP-1251 (MS Windows).
  That's why I have provided the means to generate the converted fonts
  in more than one encoding. See the file <A HREF="encodings/README.html">encodings/README</A> for 
  details about the encoding tables. Actually, if you plan to use
  these fonts with Netscape Navigator better use the aliases
  cp-866 instead of ibm-866 and windows-1251 instead of ibm-1251
  because that's what Netscape wants.
  <p>
  
  <!-- ==item * -->
  <b><tt>DSTDIR</tt></b> - directory for the resulting Type1 fonts. Be careful!
    This directory gets completely wiped out before conversion,
    so don't use any already existing directory for this purpose.
  <p>
  
  <!-- ==item * -->
  <b><tt>DSTENC<i>{language}</i></tt></b> - the list of encodings in which the destination 
    fonts will be generated for each language. Each font of that 
    language will be generated in each of the specified
    encodings. If you don't want any translation, just specify both
    <tt>SRCENC</tt> and <tt>DSTENC</tt> as iso8859-1 (or if you want any other encoding
    specified in the fonts.dir, copy the description of 8859-1 with
    new name and use this new name for <tt>SRCENC</tt> and <tt>DSTENC</tt>).
  <p>
  
  <!-- ==item * -->
  <b><tt>FOUNDRY</tt></b> - the foundry name to be used in the fonts.dir file. I have
    set it to `fromttf' to avoid name conflicts with any existing font for
    sure. But this foundry name is not registered in X11 standards and
    if you want to get the full standard compliance or have a font server
    that enforces such a compliance, use `misc'.
  <p>
  <!-- ==back -->
  
  The next few parameters control the general behavior of the converter.
  They default values are set to something reasonable.
  <p>
  
  <!-- ==over 2 -->
  <!-- ==item * -->
  <b><tt>CORRECTWIDTH</tt></b> - if the value is set to <b><tt>YES</tt></b> then use the 
    converter option <tt><b>-w</b></tt>, otherwise don't use it. See the description of 
    this option in the <A HREF="README.html">README</A> file.
  <p>
  
  <!-- ==item * -->
  <b><tt>REMOVET1A</tt></b> - if the value is set to <b><tt>YES</tt></b> then after
    conversion remove the un-encoded <tt>.t1a</tt> font files and the 
    intermediate <tt>.xpfa</tt> font metric files.
  <p>
  
  <!-- ==item * -->
  <b><tt>INSTALLFONTMAP</tt></b> - a Ghostscript parameter, if the value is set to 
    <b><tt>YES</tt></b> then install the entries for the new fonts
    right into the main <tt>Fontmap</tt> file. Otherwise just leave
    the file <tt>Fontmap.ttf</tt> in the Ghostscript configuration
    directory.
  <p>
  
  <!-- ==item * -->
  <b><tt>HINTSUBST</tt></b> - if the value is set to <b><tt>YES</tt></b> use the option
    <tt><b>-H</b></tt>, otherwise don't use it. This option enables the
    hint substitution technique. If you have not installed the X11 patch
    described above, use this option with great caution. See further 
    description of this option in the <A HREF="README.html">README</A> file.
  <p>
  
  <!-- ==item * -->
  <b><tt>ENFORCEISO</tt></b> - if the value is set to <b><tt>YES</tt></b> then
    disguise the resulting fonts as the fonts in ISOLatin1 encoding. Historically
    this was neccessary due to the way the installer scripts created the
    X11 font configuration files. It is not neccessary any more for this
    purpose. But if you plan to use these fonts with some other application
    that expects ISOLatin1 encoding then better enable this option.
  <p>
  
  <!-- ==item * -->
  <b><tt>ALLGLYPHS</tt></b> - if the value is set to <b><tt>YES</tt></b> then
    include all the glyphs from the source fonts into the resulting fonts, even
    if these glyphs are inaccessible. If it's set to <b><tt>NO</tt></b> then
    include only the glyphs which have codes assigned to them. The glyphs
    without codes can not be used directly. But some clever programs,
    such as the Type 1 library from XFree86 3.9 and higher can change
    the encoding on the fly and use another set of glyphs. If you have not 
    installed the X11 patch described above, use this option with great 
    caution. See further description of the option option <tt><b>-a</b></tt> in the 
    <A HREF="README.html">README</A> file.
  <p>
  
  <!-- ==item * -->
  <b><tt>GENUID</tt></b> - if the value is set to <b><tt>YES</tt></b> then use
    the option <tt><b>-uA</b></tt> of the converter to generate UniqueIDs for
    the converted fonts. The standard X11 Type 1 library does not use
    this ID, so it may only be neccessary for the other applications.
    The script is clever enough to generate different UniqueID for the
    same font converted to multiple encodings. Also after conversion it
    checks all the fonts generacted during the session for duplicated
    UniqueID and shows those. Still, this does not quarantee that these
    UniqueIDs won't overlap with some other fonts. The UniqueIDs are
    generated as hash values from the font names, so it's guaranteed
    that if the `<tt>convert</tt>' script runs multiple times it will
    generate the same UniqueIDs during each run. See further description 
    of this option in the <A HREF="README.html">README</A> file.
  <p>
  
  <!-- ==item * -->
  <b><tt>GENUID</tt></b> - if the value is set to <b><tt>YES</tt></b> then create
    the <tt>.pfb</tt> files, otherwise the <tt>.pfa</tt> files. The <tt>.pfb</tt>
    files are more compact but contain binary data, so you may experience some
    troubles when transferring them through the network.
  <p>
  <!-- ==back -->
  
  The following parameters are used to locate the other scripts and
  configuration files. By default the scripts do a bit of guessing for them:
  they search in the <b>ttf2pt1</b> installation directory if <b>ttf2pt1</b>
  was installed or otherwise suppose that you are running `<tt>convert</tt>' with
  `<tt>scripts</tt>' subdirectory being the current directory.
  <p>
  
  <!-- ==over 2 -->
  <!-- ==item * -->
  <b><tt>ENCDIR</tt></b> - directory containing the descriptions of encodings
  <br>
  <!-- ==item * -->
  <b><tt>MAPDIR</tt></b> - directory containing the external map files
  <p>
  <!-- ==back -->
  
  Besides that a few parameters are built into the `<tt>convert</tt>' script itself.
  You probably won't need to change them:
  <p>
  
  <!-- ==over 2 -->
  <!-- ==item * -->
  <tt><b>T1ASM</b></tt>, <tt><b>TTF2PT1</b></tt>, <tt><b>TRANS</b></tt>, <tt><b>T1FDIR</b></tt>, <tt><b>FORCEISO</b></tt> - paths to the other script
  <p>
  <!-- ==back -->
  
  Also there are a few parameters controlling the installation of
  fonts for Ghostscript. Please look at their description in the 
  <A HREF="#gs">Ghostscript</a> section of documentation or in the <b>ttf2pt1_x2gs(1)</b>
  manual page before running `<tt>convert</tt>'. If these parameters are
  set, `<tt>convert</tt>' will call the `<tt>x2gs</tt>' script automatically
  to install the newly converted fonts in Ghostscript.
  <p>
  
  After creating the configuration file run the `<tt>convert</tt>' script. Look at
  the result and the log file in <tt>DSTDIR</tt>.
  <p>
  
  Add the directory with newly converted fonts to the configuration
  of X server or font server. For most of the systems this step is
  very straightforward. For HP-UX it's rather tricky and poorly
  documented, so the file <A HREF="FONTS.hpux.html">FONTS.hpux</A> gives a short description.
  <p>
  
  If you don't have the privileges of the root user, you still can
  configure your private font server. Just use some non-standard
  port number (see <A HREF="FONTS.hpux.html">FONTS.hpux</A> for an example, exept that you won't
  need all the HP-related stuff on any other system).
  <p>
  <!-- =stop -->
  
  <H4>
  Known Problems
  </H4>
  <!
  --------------
  >
  <!-- =section cv BUGS -->
  <!-- ==head2 Known problems -->
  
  <ul>
  <li> One catch is that the X11 Type 1 font library has a rather low limit
    on the font size. Because of this the fonts with  more complicated
    outlines and the enabled hint substitution may not fit into
    this limit. The same applies to the fonts with very complicated
    outlines or with very many glyphs (especially the fonts with
    over 256 glyphs). So you will need to excercise caution with
    these options if you plan using these fonts with X11. Some vendors 
    such as HP provide the Type 1 implementation licensed from Adobe 
    which should have no such problem.
  <p>
  
    But there is a solution even for the generic X11. A patch located
    in the subdirectory `<tt>app/X11</tt>' fixes this problem as well
    as some other minor problems. Its description is provided in
    <A HREF="app/X11/README.html">app/X11/README</A>.
  <p>
  
    To fix the X11 font library, you have to get the X11 sources. I
    can recommend the ftp sites of the XFree86 project <A HREF="ftp://ftp.xfree86.org">ftp://ftp.xfree86.org</A>
    or of the Open Group <A HREF="ftp://ftp.x.org">ftp://ftp.x.org</A>. This patch was made on the sources
    of XFree86 so you may have better success with applying it to the
    XFree86 distribution. After you have got the sources, make sure
    that you can compile them. Then apply the patch as described.
    Make sure that it was applied properly. Compile the sources again
    (actually, you need only the fonts library, the fonts server, and
    possibly the X server). It would be prudent now to save your old
    font library, font server and, possibly, X server. Then install
    the new recently compiled versions of these files. Of course,
    if you know someone who already has compiled these files for the
    same OS as yours, you can just copy the binary fles from him.
  <p>
  
    Alas, building the X11 system from the source code is not the
    easiest thing in the world and if you have no experience it
    can be quite difficult. In this case just avoid the aforementioned
    features or check each converted font to make sure that it
    works properly.
  <p>
  
  <li> The Type1 font library from the standard X11 distribution
    does not work on HP-UX (at least, up to 10.01). The font server
    supplied with HP-UX up to 10.01 is also broken. Starting from 
    HP-UX 10.20 (I don't know about 10.10) they supply a proprietary font 
    library and the converted fonts work fine with it, provided that
    they are configured properly (see the file <A HREF="FONTS.hpux.html">FONTS.hpux</A>).
  <p>
  
  <li> The <tt>fonts.scale</tt> files created by the older versions of the
    <tt>ttf2pt1</tt> installation program (up to release 3.1) have conflicted 
    with the language definitions of the <tt>Xfsft</tt> font server and
    parts of it included into XFree86. To overcome this incompatibility
    the never versions creats the <tt>fonts.scale</tt> file describing all the
    fonts as belonging to the <tt>adobe-fontspecific</tt> encoding and
    the <tt>fonts.alias</tt> file with the proper names. The drawback of
    this solution is that <tt>xlsfonts</tt> gives the list of twice more
    fonts. But as a side effect the option <tt><b>ENFORCEISO</b></tt> in
    `<tt>convert.cfg</tt>' is not required for X11 any more.
  <p>
  
  <li> The conversion script has no support for Eastern multi-plane fonts.
    Contribution of such a support would be welcome.
  <p>
  </ul>
  <!-- =stop -->
  <!-- =section cv FILES -->
  <!-- ==over 2 -->
  <!-- ==item * -->
  <!-- =text TTF2PT1_SHAREDIR/scripts/convert.cfg.sample -->
  <!-- ==item * -->
  <!-- =text TTF2PT1_SHAREDIR/scripts/* -->
  <!-- ==item * -->
  <!-- =text TTF2PT1_SHAREDIR/README -->
  <!-- ==item * -->
  <!-- =text TTF2PT1_SHAREDIR/FONTS -->
  <!-- ==item * -->
  <!-- =text TTF2PT1_SHAREDIR/* -->
  <!-- ==item * -->
  <!-- =text TTF2PT1_BINDIR/ttf2pt1 -->
  <!-- ==back -->
  <!-- =stop -->
  <!-- =section cv SEE ALSO -->
  <!-- ==over 4 -->
  <!-- ==item * -->
  <!-- =text L&lt;ttf2pt1(1)&gt; -->
  <!-- ==item * -->
  <!-- =text L&lt;ttf2pt1_x2gs(1)&gt; -->
  <!-- ==item * -->
  <!-- =text L&lt;t1asm(1)&gt; -->
  <!-- ==back -->
  <!-- =stop -->
  
  <A NAME="gs"></A>
  <H3>
  Ghostscript
  </H3>
  <!
  ===========
  >
  <!-- =section gs NAME -->
  <!-- =text B&lt;ttf2pt1_x2gs&gt; - font installer for Ghostscript -->
  <!-- =stop -->
  
  <!-- =section gs DESCRIPTION -->
  The fonts generated with <b>ttf2pt1</b> work fine with Ghostscript by
  themselves. The script `<b>x2gs</b>' (or `<b>ttf2pt1_x2gs</b>' when installed
  into a public directory, to avoid name conflicts with other
  programs) links the font files from the X11 direcotry into the Ghostscript 
  directory and automatically creates the description file (<tt>Fontmap</tt>) 
  in Ghostscript format.
  <!-- =stop -->
  
  It's called as:
  <p>
  
  <!-- =section gs SYNOPSIS -->
  <!-- =text ttf2pt1_x2gs B&lt;[config-file]&gt; -->
  <!-- =stop -->
  <blockquote>
    x2gs <i>[config-file]</i>
  </blockquote>
  
  <!-- =section gs DESCRIPTION -->
  If the configuration file is not specified as an argument then the file
  `<TT>convert.cfg</TT>' in the current directory is used, just like the
  `<tt>convert</tt>' script does. Indeed, this configuration file is used for 
  both scripts.
  <p>
  
  The Ghostscript-related parameters in the configuration file are:
  <p>
  
  <b><tt>DSTDIR</tt></b> - the X11 font directory used by `<tt>x2gs</tt>' as the
    source of the fonts. This parameter is common with the X11 
    configuration.
  <p>
  
  <b><tt>GSDIR</tt></b> - the base directory of Ghostsript. If this
    parameter is set to an empty string then `<tt>convert</tt>' won't
    call `<tt>x2gs</tt>'. So if you want to get only the X11 fonts
    installed then set this parameter to an empty string. This 
    directory may vary on various system, so please check your 
    system and set this value accordingly before running the script.
  <p>
  
  <b><tt>GSFONTDIR</tt></b> - the font directory of Ghostscript. In the standard
    Ghostscript installation it's a subdirectory of <tt>GSDIR</tt> 
    but some systems may use completely different directories.
  <p>
  
  <b><tt>GSCONFDIR</tt></b> - the configuration subdirectory of Ghostscript
    that contains the <tt>Fontmap</tt> file.
  <p>
  
  <b><tt>INSTALLFONTMAP</tt></b> - if the value is set to <b><tt>YES</tt></b> then 
    install the entries for the new fonts right into the main 
    <tt>Fontmap</tt> file. Otherwise just leave the file <tt>Fontmap.ttf</tt> 
    in the Ghostscript configuration directory.
  <p>
  
  
  After preparing the configuration file run the script. It symbolicaly links 
  all the font files and creates the description file <tt>Fontmap.ttf</tt> in 
  <tt>GSCONDFIR</tt>. After that there are two choices. 
  <p>
  
  If the option <tt>INSTALLFONTMAP</tt> was set to <tt>YES</tt> then 
  the font descriptions are also automatically installed into the
  master <tt>Fontmap</tt> file. The script is clever enough to
  detect if it was run multiple times with the same directories
  and if so it replaces the old <tt>Fontmap</tt> entries with
  the new ones instead of just accumulating all of them. You
  may also run it multiple times for multiple X11 directories
  and all the results will be properly collected in the <tt>Fontmap</tt>.
  But it's your responsibility to watch that the names of the
  font files don't overlap. If the X11 font directory gets
  renamed then you have to remove its font entries from the
  <tt>Fontmap</tt> and only after that re-run `<tt>x2gs</tt>'
  for the new directory. 
  <p>
  
  On the other hand if the option <tt>INSTALLFONTMAP</tt> was set to 
  <tt>NO</tt> then go to the <tt>GSCONFDIR</tt> directory and insert the 
  contents of <tt>Fontmap.ttf</tt> into the <tt>Fontmap</tt> file
  manually. This step may be left manual to make the installation
  a little bit more safe. 
  <p>
  
  After that you may also want to redefine some of the aliases in 
  <tt>Fontmap</tt> to refer to the newly installed fonts.
  But the redefinition of the aliases may be dangerous if the width of
  characters in the new font will be different from the old font.
  Alas, there is no visible solution of this problem yet.
  <p>
  <!-- =stop -->
  <!-- =section gs FILES -->
  <!-- ==over 2 -->
  <!-- ==item * -->
  <!-- =text TTF2PT1_SHAREDIR/scripts/convert.cfg.sample -->
  <!-- ==item * -->
  <!-- =text TTF2PT1_SHAREDIR/scripts/* -->
  <!-- ==item * -->
  <!-- =text TTF2PT1_SHAREDIR/README -->
  <!-- ==item * -->
  <!-- =text TTF2PT1_SHAREDIR/FONTS -->
  <!-- ==item * -->
  <!-- =text TTF2PT1_SHAREDIR/* -->
  <!-- ==item * -->
  <!-- =text TTF2PT1_BINDIR/ttf2pt1 -->
  <!-- ==back -->
  <!-- =stop -->
  <!-- =section gs SEE ALSO -->
  <!-- ==over 4 -->
  <!-- ==item * -->
  <!-- =text L&lt;ttf2pt1(1)&gt; -->
  <!-- ==item * -->
  <!-- =text L&lt;ttf2pt1_convert(1)&gt; -->
  <!-- ==item * -->
  <!-- =text L&lt;t1asm(1)&gt; -->
  <!-- ==back -->
  <!-- =stop -->
  
  <A NAME="win"></A>
  <H3>
  MS Windows
  </H3>
  <!
  ===========
  >
  
  <b>Ttf2pt1</b> can be built on Windows either with native compiler or in
  POSIX emulation mode.
  <p>
  
  Native MS Windows compilers require a different way to build the converter 
  instead of the Makefile (their <tt>make</tt> programs commonly are quite weird
  and limited in capabilities). An example of batch file <tt>winbuild.bat</tt> 
  is provided for MS Visual C/C++. Probably it can be easily adapted for other 
  32-bit Windows and DOS compilers. The important part is to define the 
  preprocessor symbol WINDOWS during compilation.
  <p>
  
  Cygnus <tt>make</tt> almost supports full Makefiles but not quite. Seems
  like its POSIX support is also of the same quality "almost but not quite".
  So another command file <tt>cygbuild.sh</tt> is provided for Cygnus GNU C, also 
  with the preprocessor symbol WINDOWS defined. It is intended to be run from
  the Cygnus BASH shell. To run the programs produced by the Cygnus compiler 
  the Cygnus library file <tt>CYGWIN1.DLL</tt> should be copied first into 
  <tt>C:\WINDOWS</tt>.
  <p>
  
  To run the accompanying scripts Perl for Windows will be required as well as 
  other tools from the Cygnus set.
  <p>
  
  The Windows support was not particularly tested, so in case of problems with
  building or running the converter please let us know.
  <p>
  
  The pre-built code (possibly of an older version) of ttf2pt1 for MS Windows is
  available from the GnuWin32 project from
  
  <A HREF="http://gnuwin32.sourceforge.net/packages/ttf2pt1.htm">http://gnuwin32.sourceforge.net/packages/ttf2pt1.htm</A>
  <p>
  
  <A NAME="netscape"></a>
  <H3>
  Netscape Navigator/Communicator
  </H3>
  <!
  ===============================
  >
  
  Basically, the biggest problem with Netscape Navigator is that
  it has built-in fixed PostScript font names and built-in fixed 
  glyph tables for them. Oh, no, that's two! Let's start over: 
  basically the two biggest problems of Netscape Navigator are 
  that (one)it has built-in fixed PostScript font names and (two)
  built-in fixed glyph tables for them and (three) it always
  assumes that the fonts have ISOLatin1 encoding. OK, let's
  start over again: basically the three biggest problems of Netscape 
  Navigator are that (one) it has built-in fixed PostScript font names, 
  (two) built-in fixed glyph tables for them and (three) it always
  assumes that the fonts have ISOLatin1 encoding and (four) it
  does not remember the scaled font size between the sessions.
  You did not expect such a Spanish Inquisition, did you ? (<A HREF="#nsfn1">*</a>)
  <p>
  
  Luckily, we have solutions for all of these problems. They are
  located in the subdirectory `<tt>app/netscape</tt>' and described
  in <A HREF="app/netscape/README.html">app/netscape/README</a>.
  <p>
  
  <A NAME="nsfn1"></a>
  &nbsp;&nbsp;-------<br>
  &nbsp;&nbsp;<FONT SIZE=-1>*) See Monty Python's Flying Circus, episode 15</FONT></FONT>
  <p>
  
  <FONT COLOR="#3333FF"><FONT SIZE=-1>*8*</FONT></FONT>
  <H4>
  Netscape and cyrillic fonts<br>
  <!
  ---------------------------
  >
  (courtesy of Zvezdan Petkovic)
  </H4>
  
  If you use TrueType fonts in your X, as I do, and you always get
  KOI8-R encoded pages, then your Netscape does not recognise windows-1251
  encoding.  Microsoft TrueType fonts simply declare all encodings they
  can support including KOI8-R.  For some reason, KOI8-R always wins over
  ISO-8859-5 in Netscape under X.  If you are reading other cyrillic
  languages besides Russian, you might want to either erase KOI8-R entries
  from the fonts.dir and fonts.scale files, or alternatively fix Netscape.
  I put this line in my .Xdefaults.
  <p>
  
  <blockquote><tt>
      Netscape*documentFonts.charset*koi8-r:               iso-8859-5
  </tt></blockquote>
  <p>
  
  Notice that you can still read Russian sites without trouble because
  Netscape translates KOI8-R to ISO-8859-5 on the fly. I read both Russian
  and Serbian sites with no trouble.
  <p>
  
  <b>Note:</b> <i>If anybody knows the way to tell Netscape under Unix how to 
  recognise {windows,ibm,cp}-1251 encoded fonts, I'd like to hear about that.</i>
  <p>
  
  <A NAME="rpm"></a>
  <H3>
  Linux RPM package
  </H3>
  <!
  =================
  >
  
  The spec file for the creation of a Linux RPM package is located in 
  <tt>app/RPM</tt>. It has been contributed by Johan Vromans.  When 
  <tt>make all</tt> is ran in the main directory it among the other 
  things creates the version of itself adapted to Linux in <tt>app/RPM</tt>,
  you may want to copy that version back to the main directory.
  <p>
  
  <B>Warning:</B> Please note that the install section is incomplete, and 
  the installed scripts won't work until the paths inside them
  are corrected.
  <p>
  
  <A NAME="framemaker"></a>
  <H3>
  FrameMaker
  </H3>
  <!
  ==========
  >
  
  The fonts and AFM files generated by the version 3.2 and higher 
  should work with Framemaker without problems. The AFM files 
  generated by the previous versions of the converter require a 
  line added to them:
  <p>
  
  &nbsp;&nbsp;<tt>EncodingScheme FontSpecific</tt>
  <p>
  
  And the underscores in the font names of the font and AFM files 
  generated by the older versions may need to be changed to dashes.
  <p>
  
  <B>NOTE by Jason Baietto:</B> Ignore the directions in the Frame on-line docs 
  that say to put a "serverdict begin 0 exitserver" line in the pfa files.  
  Doing this caused both my printer and ghostscript to choke on the resulting
  output from FrameMaker, so I would not advise doing this (though your
  mileage may vary).
  <p>
  
  <A NAME="soffice"></a>
  <H3>
  StarOffice
  </H3>
  <!
  ==========
  >
  
  StarOffice 5.1x has been reported to crash if the <tt>.afm</tt> file contains
  spaces in the values of such statements as <b>Version</b>, <b>Weight</b> etc.
  These spaces are permitted by the Adobe spec, so this is a problem of
  StarOffice. The easiest way to fix these <tt>.afm</tt> files for StarOffice
  is to remove spaces in these strings or remove these strings (in case if
  they are optional) at all. This can be done automatically with a <tt>sed</tt>
  script. It seems that StarOffice 5.2 has this problem fixed, so we decided to
  spend no efforts on providing workarounds for 5.1 with <tt>ttf2pt1</tt>.
  <p>
  
  </BODY>
  </HTML>